iniBuilds has released v1.1.5 of its A350 Airliner for Microsoft Flight Simulator 2020 and 2024, marking another step forward in stability and polish for the long-haul twinjet.

This update is heavily focused on squashing bugs and improving reliability. A wide range of WASM crash scenarios have been fixed, including issues tied to autosaves, rollouts, and go-arounds. Flight management has also received attention, with improvements to speed targets, climb performance in hot conditions, descent predictions, and ECAM logic. Avionics consistency has been tightened too, covering everything from TCAS behaviour to HUD symbols and ECAM displays.

Alongside stability fixes, iniBuilds has slipped in new quality-of-life updates and features. The Onboard Information System (OIS) now supports night-time LIDO charts, while additional refinements to flight displays, TAWS alerts, and autopilot behaviour make day-to-day operation smoother. Visual adjustments to SU3 LOD handling and animation corrections have also been done, and the soundscape now features better cabin callouts.

Perhaps most notably, v1.1.5 also introduces Beyond ATC CPDLC support.

As always, the full changelog follows below:

V1.1.5
SYSTEMS ⚙️
ADDED: Beyond ATC CPDLC support
FIXED: WASM crash when reapplying autopilot after touch and go at LFBO 32L
FIXED: WASM crash when loading autosave
FIXED: WASM crash during rollout phase
FIXED: WASM crash due to BTV disengagement
FIXED: WASM crash + CTD on Xbox
FIXED: Flight control test – elevator display reaches full deflection before sidestick
FIXED: Managed speed target continues to jump
FIXED: GA-Soft not targeting 2000ft/min  on initial climb
FIXED: T-P estimated time becoming false after ADES
FIXED: Engine underperformance in climb in hot conditions
FIXED: Block/Flight-time not persisting after autosave load
FIXED: REC MAX FL below OPT in edge cases
FIXED: Loss of control on go-around
FIXED: EFOB prediction during descent phase
FIXED: VLS not masked in ALTN or DIR LAW
FIXED: Offset behavior protocol tweaks
FIXED: F-PLN INFO menu remains open when changing F-PLN
FIXED: HDG SEL: Current heading not captured during turn
FIXED: TAWS messages missing from PFD
FIXED: Brake pressure green bars displaced on ECAM
FIXED: Phantom TOC symbols appearing on ND
FIXED: Blue VD range staple angled incorrectly to flightpath
FIXED: HUD latched symbol remains when not in DES mode
FIXED: PFD altitude ticks disappearing during climb
FIXED: Pressing SEC in KCCU not always showing SEC INDEX, SEC 1
FIXED: Incorrect SEC page opens from ACTIVE F-PLN
FIXED: Active hold showing as white instead of green
FIXED: DES PERF page missing speed restrictions
FIXED: DES PERF PRED TO value flickering
FIXED: Previous/old D-ATIS subpage behavior updated
FIXED: BTV shown as engaged on FMA during float/bounce when braking not active
FIXED: PFD Switching behavior feedback from earlier versions
FIXED: TCAS RA warnings not disappearing from alt tape
FIXED: Text overlay on ATC COMM page
FIXED: OIS on Center button display logic
FIXED: Metric- Selected Alt does not update in ALT CRZ mode
FIXED Missing ABEAM button on pilot waypoints
FIXED: VOR Autotuning inputting wrong freqs
FIXED: FO TERR display inop
FIXED: Manual UTC does not update predicted time
FIXED: VSD behaviour in PLAN mode
FIXED: SEC PLAN logic with PD waypoints
FIXED: VPA incorrect on ILS approaches great than 3 deg.
FIXED: Cannot edit approach course on NAVIADS page
FIXED: FO HUD wind info missing

ART 🎨
FIXED: SU3 LOD changes
FIXED: THS not animating

OIS💻
FIXED: C&D: HUD is ON by default
FIXED: RESET BRAKE TEMP function added
ADDED: Nighttime LIDO Charts

SOUND 🔊FIXED: “Cabin Ready for Landing” callout plays post-departure

If you want to read the full update post, you can do so on the iniBuilds forums.

Version 1.1.5 is available now via the iniManager, free for existing owners. New customers can purchase the iniBuilds A350 Airliner through the iniBuilds Store for $80.59, requiring 13.05 GB of free storage to install.

For all the latest news and updates, stay tuned on Threshold!

If you enjoy our content and want to support Threshold, consider joining us on Patreon!