iniBuilds Updates Airbus A300-600R for MSFS
iniBuilds has recently launched an update for their Airbus A300-600R for Microsoft Flight Simulator. This update includes several new features as well as several bug fixes.
The latest version, v1.1.0, introduces the much-awaited PW engine variant. With this update, users can now enjoy flying with both PW passenger and PW freighter variants. Additionally, the aircraft now has a modern radio panel, the IDC, which has both CPDLC and ACARS systems and sounds. The update also includes a moving map functionality for Navigraph and an EFB with a Landing Distance calculation performance page.
The version v1.1.0 has a comprehensive changelog, which can be found below:
v1.1.0
New Features
Added – IDC modern radio panel with CPDLC and ACARS systems and sounds
Added – PW passenger and freighter variants with unique systems and engine sounds
Added - Navigraph enroute moving map functionality
Added – EFB Landing Distance calculation performance page
Bug Fixes
Systems
Added - Speed mode preselect
Added - Better VNAV profile descent implementation
Added – Now possible for FMC to not reset when changing panel state
Added - Decel mode
Added - FMC to not reset when changing panel state
------
Fixed - APU ECAM shutdown logic
Fixed - Throttle goes into idle on bumpy runway
Fixed - VNAV issues
Fixed - ADF flickering
Fixed - Inhibit A/THR -> MAN THR reversion during TO phase
Fixed - HYD levels not the same on OHP and ECAM
Fixed - There is no connection between compressor rotation and temperature rate in crank mode
Fixed - ND Drawing issues
Fixed - 3.00° missing in fpl during RNAV approach
Fixed - Speed constraint not taken into account
Fixed - Temps going to -56° in cockpit/cabin after starting the descent
Fixed - AI copilot can’t change transponder code
Fixed - VOR mode stays in VOR* even though the VOR track got captured
Fixed - No ADF/NDB identifier tone
Fixed - Oil runs out even though the maintenance stuff is off
Fixed - APU not starting
Fixed - VS does not sync with current climb/des rate
Fixed - APPR page info doesn't clear if you have done an RNAV
Fixed - Flex derate does not modify EPR on display
Fixed - Oil runs out even though the maintenance stuff is off
Fixed – Throttle calibration issue Thrustmaster Boeing Yoke
Fixed - Throttle2_cut sets thrust to 50%, Throttle1_cut works as expected
Fixed - Inhibit A/THR -> MAN THR reversion during TO phase
Fixed - Speed mode preselect
Fixed - HYD levels not the same on OHP and ECAM
Fixed - There is no connection between compressor rotation and temperature rate in crank mode
Fixed - 3.00° missing in fpl during RNAV approach
Fixed - Speed constraint not taken into account
Fixed - Temps going to -56° in cockpit/cabin after starting the descent
Fixed - AI copilot can't change transponder code
Fixed - VOR mode stays in VOR* even though the VOR track got captured
Fixed - Cannot enter custom RTE RSV, immediately changes back to default value
Fixed - ADF flickering
Fixed - Throttle goes into idle on bumpy runway
Fixed - APU ECAM shutdown logic
Fixed - VNAV profile descent implementation
Fixed - VNAV pathing
Fixed - Typo in aircraft.cfg files
Fixed - DC Voltage gauge showing jumpy anim
Fixed - Throttle issue, exclusive to the Thrustmaster Boeing Yoke
Fixed - Rad alt call seems off.
Fixed - Similar to the two TCAS tests, there are also two GPWS tests
Fixed - Auto Checklist injects fuel instantly, leading to hot start, A310 checklists waits till 20% N2
Fixed - Max Pointer reset no TT
Fixed - APU oil looks to have overflowed
EFB
Added - Allow "My Flight" page to pull info from FMGS when user hand codes flights without Simbrief
Added – better EFB descriptions
Added - Realistic Door Cargo Door Speed control to settings
------
Fixed - Make checklists, flightplan and OFP click and draggable
Fixed - APU oil looks to have overflowed
Fixed - APU oil looks to have overflowed
Fixed - Altimeter unit always in hPa on performance page
Fixed - OFP formatting issues
Fixed - En-Route Map is possible to click the Leaflet link on the bottom right
Fixed - Make checklists, flightplan and OFP click and draggable
Sounds
Added – PW sounds
Added – IDC sounds
------
Fixed - Left engine balance not correct vs right engine from pilots seat
Fixed - No ADF/NDB identifier tone
Fixed - Abrupt change in engine sounds during start up
Fixed - Missing button sounds
Fixed - Brake fan sound remains when MSFS is not in focus
Fixed - No landing sound effect
Fixed - Sound several events
Fixed - Flaps motors too quiet in wing view
Fixed - Main Cargo Door missing sound (was there ever a sound?)
Fixed - ALT HLD sound switch plays when FMA mode changes
Art
Fixed - Horizontal Stab not moving with THS setting
Fixed - Reverser Sleeves animation should fully extend as soon as reversers are open - Does not correlate to thrust setting
Fixed - Pallets clipping
Fixed - No integ lighting on brightness buttons IDC
Fixed - Altimeter gauge flickers
Fixed - Duplicated text on overhead
Fixed - DC Voltage gauge showing jumpy anim
Fixed - Reg decal overlapFixed - N2 gauge indications
The newly updated version of Airbus A300-600R is now available on iniManager. It requires 6.05GB of storage space and can be purchased from the iniBuilds Store for approximately $44.19USD. (Currently, it is on sale for $32.81USD at the time of writing.)
For the latest flight simulation news, remember to stay tuned on Threshold!
Share this page
More Reads:
COMMENT ADVISORY:
Threshold encourages informed discussion and debate - though this can only happen if all commenters remain civil when voicing their opinions.