TFDi Design has recently released their long-awaited MD-11 update for Microsoft Flight Simulator 2020/2024, bringing massive improvements to the aircraft’s 3D model, many bug fixes and tweaks, a new engine variant, and full compatibility with Microsoft’s latest flight simulator.

The new update will brings a highly detailed cockpit with multiple customer options and subtle variances between variants, a meticulously modeled exterior with a strong emphasis on mechanical details, Pratt & Whitney engines, and a high-fidelity representation of the aircraft’s systems including all manual and automatic control modes and advanced flight management system/auto-flight systems, high-quality sounds, an interactive passenger cabin with working in-door controls, lavatories, overhead bins, window shades, and seat-back trays, and integration with many third party software and hardware options.

The complete changelog for the update follows below:

• ➕ ADDED - [MSFS/FS24] Engine windmilling behavior
• ➕ ADDED - [MSFS/FS24] Amber AFS OVRD OFF indicators
• ➕ ADDED - Extended Simulation
• ➕ ADDED - Ability to deploy oxygen masks (PAX cabin)
• ➕ ADDED - Oxygen system test functionality
• ➕ ADDED - On-screen keyboard to EFB
• ➕ ADDED - Manual cabin light control
• ➕ ADDED - Manual elevator feel logic
• ➕ ADDED - Cabin power variable
• ➕ ADDED - New interaction system
• ➕ ADDED - LODs
• ➕ ADDED - New ambient occlusion textures
• ➕ ADDED - RANGE DISAG message logic
• ➕ ADDED - MAP FAIL and NO PLAN MODE logic
• ➕ ADDED - FMC INDEPENDENT OPERATION and TIMEOUT-PLEASE WAIT logic
• ➕ ADDED - Audio knob emissive map
• ➕ ADDED - Working cabin door controls to cabins
• ➕ ADDED - Specular highlights on some cockpit surfaces
• ➕ ADDED - [MSFS/FS24] Circuit breakers
• ➕ ADDED - Circuit breaker amp labels
• ➕ ADDED - Cockpit panel collision mesh for VR support
• ➕ ADDED - Moving pack inlets
• ➕ ADDED - Logo light bulbs on stabilizer
• ➕ ADDED - Nose gear WoW spring
• ➕ ADDED - Animated clearview windows and window shade pull tabs
• ➕ ADDED - Significant wing details
• ➕ ADDED - Lower cargo compartment details
• ➕ ADDED - Galley bus light logic
• ➕ ADDED - Ditching functionality
• ➕ ADDED - [MSFS/FS24] ADG animation
• ➕ ADDED - [MSFS/FS24] Landing gear light type option
• ➕ ADDED - GLY EXT PWR behavior
• ➕ ADDED - Entry door disarm/emergency lights
• ➕ ADDED - [MSFS/FS24] APU heat blur effect
• ➕ ADDED - GEN APU OFF light/alert behavior
• ➕ ADDED - [MSFS/FS24] Tooltips
• ➕ ADDED - [MSFS/FS24] Checklists
• ➕ ADDED - RNP/ANP simulation
• ➕ ADDED - [MSFS/FS24] Accent glow around audio knobs for integral lighting
• ➕ ADDED - Minimums output variable
• ➕ ADDED - HDG/TRK, IAS/MACH, and VS/FPA output variables
• ➕ ADDED - [MSFS/FS24] Interactive points
• ➕ ADDED - AUX HYD export variable
• ➕ ADDED - Custom N1 export variables
• ➕ ADDED - [MSFS/FS24] Added Hydraulics 1/2 aux pump sounds
• ➕ ADDED - [MSFS/FS24] Add ability to hear difference in engine sound when opening FD windows and 1L/1R doors
• ➕ ADDED - [MSFS/FS24] Added new electronic open/close door sounds for all main cabin doors
• ➕ ADDED - [MSFS/FS24] Added windmilling sound
• ➕ ADDED - GLY EXT PWR alerts
• ➕ ADDED - Flight Simulator 2024 support
• ➕ ADDED - [FS24] Lavatories
• ➕ ADDED - [FS24] Working wiper support
• ➕ ADDED - [FS24] Default stairs, baggage loading, and catering support
• ➕ ADDED - [FS24] Support for default 3D passengers and copilot
• ➕ ADDED - [FS24] Exterior clickspots for doors, APU, and ASU
• ➕ ADDED - Aft overhead APU light functionality
• ➕ ADDED - ENG OUT behavior
• ➕ ADDED - CRZ FL ABOVE MAX FL message
• ➕ ADDED - Custom oil simulation
• ➕ ADDED - Significant detail to engines
• ➕ ADDED - Significant detail to flaps, slats, and control surfaces
• ➕ ADDED - 3D rivets and panel lines to exterior model
• ➕ ADDED - New 8K exterior textures
• ➕ ADDED - Failure and wear-and-tear support
• ➕ ADDED - Extended Simulation application
• ➕ ADDED - Lavatory smoke alert
• ➕ ADDED - "Get Landing Weight" button on EFB
• ➕ ADDED - Rising runway display option
• ➕ ADDED - Custom vibration simulation
• ➕ ADDED - ALTN predictions
• ➕ ADDED - Step climb T/C point support
• ➕ ADDED - Custom EGT simulation
• ➕ ADDED - Quick search capability to SID/STAR page
• ➕ ADDED - Multiple S/C support
• ➕ ADDED - Altimeter return-to-previous-setting functionality
• ➕ ADDED - SLATS INHIBITED alert/behavior
• ➕ ADDED - Support for ATO waypoints
• ➕ ADDED - Standby NAV/RAD, FPLN, and PROG support
• ➕ ADDED - Tip fuel trapped indicators on SD
• ➕ ADDED - Wiper sounds
• ➕ ADDED - Stickshaker sound
• ➕ ADDED - MECH CALL sound
• ➕ ADDED - EVAC alarm sound
• ➕ ADDED - [MSFS/FS24] Ambient electrical whine to cabin
• ➕ ADDED - [MSFS/FS24] Truck-tilt animations
• ➕ ADDED - Manual landing gear handle
• ➕ ADDED - Ambient bleed air pressure behavior
• ➕ ADDED - Ability to load nav data from Nav-Primary/Nav-Secondary folder within Work directory
• ➕ ADDED - New passenger/freighter cabins
• ➕ ADDED - New, higher detail knobs and switches
• ➕ ADDED - ADG deploy lever
• ➕ ADDED - ASU/GPU/Cargo door control access panels
• ➕ ADDED - New GPU/ASU models
• ➕ ADDED - [MSFS/FS24] Stick shaker animation
• ➕ ADDED - [MSFS/FS24] Interactive window shades
• ➕ ADDED - [MSFS/FS24] Hideable yokes (click rudder pedal housing to unhide on initial load)
• 🔧 FIXED - Excitor being turned on when engine fuel valve is closed
• 🔧 FIXED - APU ON light flashing indefinitely when shutoff via APU fire handle
• 🔧 FIXED - Incorrect flap disagree alerting
• 🔧 FIXED - Incorrect FMA during RETARD mode
• 🔧 FIXED - LSAS FAIL lights not illuminating
• 🔧 FIXED - Missing consequences on AIR MANF, DUMP VLV DISAG, various hydraulic alerts, and wing/tail a-ice disag alerts
• 🔧 FIXED - Inaccurate cabin altitude alert logic
• 🔧 FIXED - Missing/inaccurate boxes and alerts on air SD
• 🔧 FIXED - FWD and LWR AUX tank readout
• 🔧 FIXED - Various geometry and texture issues in PAX/F cabin
• 🔧 FIXED - ACARS Free text stripping whitespaces and ignoring new lines
• 🔧 FIXED - FWD AUX tank fuel scheduling and alerts
• 🔧 FIXED - Alignment of OFF label on electrical SD
• 🔧 FIXED - Yoke returning to pre-AP position when disconnected
• 🔧 FIXED - Incorrect FMC selection logic by FCC
• 🔧 FIXED - Incorrect APU N1 targets
• 🔧 FIXED - Ability for ATS to target speed above/below VMAX-5/VMIN+5
• 🔧 FIXED - Outboard flaps continuing to move in excess of 4 degrees of asymmetry
• 🔧 FIXED - Size and alignment of v-speeds and speed bugs on PFD
• 🔧 FIXED - Selected speed/FMS speed not rising to V2+10 on takeoff
• 🔧 FIXED - Galley bus buttons
• 🔧 FIXED - APU door bug on freighter
• 🔧 FIXED - Bank limit knob behavior
• 🔧 FIXED - Turn trend vector disappearing too early
• 🔧 FIXED - Drooped leading edge animation speed on RH side
• 🔧 FIXED - Engines moved slightly outboard
• 🔧 FIXED - Horizontal stab vertical position adjusted
• 🔧 FIXED - UPR AUX bypass button light color
• 🔧 FIXED - [P3D] Center gear compression animation
• 🔧 FIXED - [P3D] Nose gear door animation on freighter
• 🔧 FIXED - [P3D] ECON texture and emissive map mismatch
• 🔧 FIXED - [P3D] Breaker texture and emissive map mismatch
• 🔧 FIXED - Double binding of default TO/GA button
• 🔧 FIXED - Annunciator test illuminating both red and green landing gear lights
• 🔧 FIXED - [P3D] RH wing light orientation
• 🔧 FIXED - SMOKE/ELEC switch effect on systems
• 🔧 FIXED - [MSFS/FS24] Freighter cabin missing OPEN and arrow symbols on right door
• 🔧 FIXED - [MSFS/FS24] Z-fighting on decals in freighter cabin
• 🔧 FIXED - Screws not moving with fire handle guards
• 🔧 FIXED - Fuel dumping behavior
• 🔧 FIXED - [P3D] ECON switch
• 🔧 FIXED - Incorrect leg/airway insertion behavior under some conditions
• 🔧 FIXED - Incomplete airways being entered with the wrong terminating waypoint
• 🔧 FIXED - Double/incorrect handling of default autobrake events
• 🔧 FIXED - [P3D] ER Fuel panel visibility
• 🔧 FIXED - [P3D] Standby attitude slip ball animation
• 🔧 FIXED - [P3D] Steering tiller animation
• 🔧 FIXED - [P3D] Ditching button
• 🔧 FIXED - [P3D] MOVIE / PA IN USE LIGHTS linking error
• 🔧 FIXED - [P3D] YD/LSAS lights
• 🔧 FIXED - [P3D] Outflow valve range
• 🔧 FIXED - [P3D] EVAC light
• 🔧 FIXED - [P3D] FIRE AGENT LOW light tags, Bleed air button linked animations
• 🔧 FIXED - [P3D] AUTO ANTI ICE button and light
• 🔧 FIXED - [P3D] Flap pylon clipping
• 🔧 FIXED - [P3D] CMCDU notification lights
• 🔧 FIXED - Turnoff lights partially operating without power
• 🔧 FIXED - Engine starter light and rotation beginning too quickly
• 🔧 FIXED - Very fast oil cooling
• 🔧 FIXED - TCAS status always tied to IRU1
• 🔧 FIXED - Erroneous NAV OFF flashing light behavior
• 🔧 FIXED - Inability to align IRU 2/3 when 1 has failed
• 🔧 FIXED - ATS not disconnecting when data is invalid
• 🔧 FIXED - FMC/FCC not handling avionics failures properly
• 🔧 FIXED - Anti-ice not affecting bleed temps
• 🔧 FIXED - [MSFS/FS24] Call Panel Lighting
• 🔧 FIXED - ADG not supplying hydraulic power properly
• 🔧 FIXED - [MSFS/FS24] EFB not showing correct initial IRS alignment time value
• 🔧 FIXED - Incorrect initial oil temperature
• 🔧 FIXED - "PA" instead of "RA" on RH glareshield altimeter setting panel
• 🔧 FIXED - Reversed rudder trim behavior
• 🔧 FIXED - Less accurate bearing-to calculation
• 🔧 FIXED - Radar brightness behavior
• 🔧 FIXED - Erroneous v-speed reset behavior
• 🔧 FIXED - FMA/AP reset behavior during landing
• 🔧 FIXED - [MSFS/FS24] Broken AGENT LO lights
• 🔧 FIXED - LSAS functionality not affecting autopilot/autoland
• 🔧 FIXED - TRIM AIR and WINDSHIELD DEFOG switches being reversed
• 🔧 FIXED - EGT start lines being removed from EAD too early
• 🔧 FIXED - Incorrect size/position of hydraulic low quantity box
• 🔧 FIXED - GLY EXT PWR not showing on ELEC SD
• 🔧 FIXED - [MSFS/FS24] Ability to click through cabin to cockpit
• 🔧 FIXED - HYD FAIL alerts using + instead of &
• 🔧 FIXED - Flap disag text box alignment
• 🔧 FIXED - Missing SLAT DISAG on CONFIG SD
• 🔧 FIXED - Exterior lights not being alternate action switches
• 🔧 FIXED - GW not showing unit when blank
• 🔧 FIXED - Misaligned final digits on total fuel
• 🔧 FIXED - Missing APU box during annunciator test
• 🔧 FIXED - Missing SEL APU AIR OFF alert
• 🔧 FIXED - Misplaced HYD temp T
• 🔧 FIXED - ECP not properly respecting EIS source
• 🔧 FIXED - Fire agents not being deployed by the correct handle actions
• 🔧 FIXED - Incorrect ambient oil temp
• 🔧 FIXED - Incorrect hydraulic display scenario with SMOKE/ELEC pulled
• 🔧 FIXED - Reversers not stowing with SMOKE/ELEC in use
• 🔧 FIXED - Fire handles not shutting off air system
• 🔧 FIXED - Brakes not increasing temp if held while accelerating
• 🔧 FIXED - Disabling FD and disconnecting AP preventing ATS from functioning properly
• 🔧 FIXED - Inaccurate max-brightness override when all DUs are off
• 🔧 FIXED - [MSFS/FS24] Cockpit fans silence before exiting (the fans will slowly fade as you get further away from the cockpit)
• 🔧 FIXED - [MSFS/FS24] Fixed GPU position (using new NodeName)
• 🔧 FIXED - [MSFS/FS24] Fixed ASU sound position
• 🔧 FIXED - AUX HYD pumps not working reliably
• 🔧 FIXED - Long form LAT/LON entries not working properly in the MCDU
• 🔧 FIXED - Slightly too large EPR/N1 needle
• 🔧 FIXED - ATO waypoint on SEC ALTN flight plan not working properly
• 🔧 FIXED - Generator nor relay turns amber when GEN DRIVE FAULT
• 🔧 FIXED - Misaligned/cutoff reminder messages
• 🔧 FIXED - [MSFS/FS24] BRAKES alert sounding different
• 🔧 FIXED - PFD FMA/ALT display when selected altitude is less than 100
• 🔧 FIXED - Inaccurate G/A engagement/command behavior
• 🔧 FIXED - Edge case preventing APU bleed from providing sufficient start pressure
• 🔧 FIXED - Fuel used reset button not working with engines on
• 🔧 FIXED - [P3D] AGENT LOW lights not working
• 🔧 FIXED - [MSFS/FS24] Incorrect default passenger weight entry behavior
• 🔧 FIXED - [MSFS/FS24] Missing exterior light viztags
• 🔧 FIXED - Inaccurate ambient bleed pressure
• 🔧 FIXED - Chocks not preventing aircraft movement
• 🔧 FIXED - PFD altitude tape indicator showing 10s instead of 20s
• 🔧 FIXED - Geometry issue on N1/EPR bracket
• 🔧 FIXED - Slightly misaligned radio altitude text on PFD
• 🔧 FIXED - Misaligned radar range text on ND
• 🔧 FIXED - Alignment of TAXI speeds/text on PFD
• 🔧 FIXED - Gap between alert lines on EAD
• 🔧 FIXED - Size of vertical speed diamond on PFD
• 🔧 FIXED - ISFD not depending on AUX IRU for heading
• 🔧 FIXED - Various misaligned boxes/values on EAD
• 🔧 FIXED - Missing FPA indication on FPLN page
• 🔧 FIXED - APU ON light showing if relays are closed but APU is not powered
• 🔧 FIXED - Engine starter cutting out if not within start range (engines will now simply not start)
• 🔧 FIXED - Pushing/pulling AFS knobs having an effect while on the ground
• 🔧 FIXED - Incorrect arming of faulted hydraulic pumps
• 🔧 FIXED - Inability to disarm hydraulic pumps
• 🔧 FIXED - TCAS status text alignment
• 🔧 FIXED - Various misaligned boxes/values on engine SD
• 🔧 FIXED - POS REF IRU status showing IRU 2 values for IRU 3
• 🔧 FIXED - A condition causing FM legs to project from 0,0
• 🔧 FIXED - Missing space on GO AROUND page title
• 🔧 FIXED - Inaccurate scrolling N1/EPR animation
• 🔧 FIXED - Subsequent IDLE CLAMP modes not driving throttles to idle
• 🔧 FIXED - FMC not resetting TOGW (and VSR/VCL) field after flight
• 🔧 FIXED - Misaligned hydraulic quantity text/amber box
• 🔧 FIXED - ACCEL, EOACCEL, and CLB THRUST altitudes not adjusting to arrival airport
• 🔧 FIXED - VFR/VSR not updating during later stages of flight
• 🔧 FIXED - Inaccurate emergency light behavior
• 🔧 FIXED - Inaccurate ADF/VOR geometry/data text alignment on bottom of ND
• 🔧 FIXED - Misaligned brake temp amber box
• 🔧 FIXED - FMC able to pass ACCEL, EOACCEL, and CLB THRUST while on the ground
• 🔧 FIXED - Incorrect electrical relay display on SD
• 🔧 FIXED - Various systems not properly depending on upstream systems
• 🔧 FIXED - Inability to correctly edit ALTN legs
• 🔧 FIXED - Various PROF performance issues
• 🔧 FIXED - Incorrect handling of restriction phase behavior
• 🔧 FIXED - Engine shutting down after reaching self-sustaining point if air is lost
• 🔧 FIXED - Incorrect air conditioning simulation in lower cargo compartment
• 🔧 FIXED - Various FMS-related PROF descent issues
• 🔧 FIXED - S/C showing up on NEXT sections where it should not
• 🔧 FIXED - PFD and ND heading fonts
• 🔧 FIXED - Engine shutting down if air is lost after starter cutout
• 🔧 FIXED - Air conditioning in lower cargo
• 🔧 FIXED - Missing HOLD parameters
• 🔧 FIXED - Trim switches disengaging AP in SINGLE or DUAL LAND mode
• 🔧 FIXED - LSAS working while trim switches are active
• 🔧 FIXED - PW startup surge
• 🔧 FIXED - Trim disabling all of LSAS, not just certain modes
• 🔧 FIXED - FPA showing on PFD when invalid
• 🔧 FIXED - Inability to edit RTE/RSV on SEC FPLN
• 🔧 FIXED - Inability to swap active/secondary nav data
• 🔧 FIXED - FCP shutting down with EMER DC available
• 🔧 FIXED - Inaccurate/incomplete data display above waypoints on FPLN/DIR INTC page
• 🔧 FIXED - Inability to clear FROM leg
• 🔧 FIXED - Erroneous HYD 3 FAIL alert
• 🔧 FIXED - Inaccurate hydraulic system test behavior
• 🔧 FIXED - TO page changing to APPR without pilot interaction
• 🔧 FIXED - Ability to interact with certain FMC functions via MCDU when FMC has failed
• 🔧 FIXED - APU DISAG logic issue
• 🔧 FIXED - Distance calculation issue relating to pseudo waypoints
• 🔧 FIXED - T/O FMA and FMS SPEED behavior
• 🔧 FIXED - IGN OVRD not forcing excitor on
• 🔧 FIXED - Lack of length limit on NEW WAYPOINT identifier length
• 🔧 FIXED - Ability to manually enter invalid lat/lon
• 🔧 FIXED - EVAC shutoff horn default position
• 🔧 FIXED - Ability to set invalid numbers on altimeters
• 🔧 FIXED - FMC showing <ACT> when not available
• 🔧 FIXED - Lack of latching behavior on various buttons
• 🔧 FIXED - Call button behavior
• 🔧 FIXED - Various minor hydraulic logic issues
• 🔧 FIXED - Inability to LAT REV from some ALTN legs
• 🔧 FIXED - Logic issue causing bad calculations from takeoff performance calculator
• 🔧 FIXED - Degree symbol too large on displays
• 🔧 FIXED - PFD marker flash rates
• 🔧 FIXED - LOC and G/S miscompare logic
• 🔧 FIXED - Battery charging instantly
• 🔧 FIXED - PA and MAINT INTPH button not being two-position
• 🔧 FIXED - ER fuel distribution
• 🔧 FIXED - Reversed rudder standby alerts
• 🔧 FIXED - Alignment of status text on SENSOR STATUS page
• 🔧 FIXED - Various inaccurate alerts
• 🔧 FIXED - Various fuel system transfer behavior issues
• 🔧 FIXED - Cargo temperature alert not using correct units
• 🔧 FIXED - Inaccurate LOC/GS miscompare logic
• 🔧 FIXED - Incorrect engine start override behavior
• 🔧 FIXED - Visual issue with NAC TEMP and VIB outlines
• 🔧 FIXED - Various V-speed data issues
• 🔧 FIXED - Inability to hear chimes in cabin
• 🔧 FIXED - Incorrect automatic pitch trim behavior
• 🔧 FIXED - Elevator trim speed
• 🔧 FIXED - Pseudo waypoints showing constraints
• 🔧 FIXED - ND turn prediction curve display
• 🔧 FIXED - APU START/STOP switch behavior
• 🔧 FIXED - Hydraulic system caching issue resulting in lower performance
• 🔧 FIXED - Issue with anti-ice mode logic
• 🔧 FIXED - Automatic anti-ice not engaging properly
• 🔧 FIXED - TERRAIN TERRAIN alert also including PULL UP
• 🔧 FIXED - MECH CALL button not depressing
• 🔧 FIXED - Erroneous (TF) leg before runway under certain conditions
• 🔧 FIXED - TCAS mode showing on PLAN mode
• 🔧 FIXED - TCAS showing aircraft that are on the ground
• 🔧 FIXED - Certain predictions calculating beyond destination
• 🔧 FIXED - Hydraulic RMPs and NRMPs not simulating valve position correctly
• 🔧 FIXED - Missing DISAG text on HYD SD
• 🔧 FIXED - Missing IRU battery test
• 🔧 FIXED - Flight controls drooping at high speed
• 🔧 FIXED - Double light when center gear is extended but commanded up
• 🔧 FIXED - Landing checklist appearing too early
• 🔧 FIXED - PFD and ND heading box not matching
• 🔧 FIXED - Inaccurate cargo fire test behavior
• 🔧 FIXED - Track diamond showing without IRU alignment
• 🔧 FIXED - Crossfeed/fill not working properly in manual mode
• 🔧 FIXED - VMAX not being set on ground
• 🔧 FIXED - Inaccurate V1/VR/V2 layout on PFD
• 🔧 FIXED - EXT PWR voltage/frequency not showing when APU is connected
• 🔧 FIXED - Minor alignment issue on ELEC SD
• 🔧 FIXED - Battery not reflecting charge status immediately
• 🔧 FIXED - Incorrect APU BLEED switch type
• 🔧 FIXED - CAWS altitude alert setting not applying
• 🔧 FIXED - Bleed press lights not illuminating when they should
• 🔧 FIXED - ISOL valves not turning green without air flow
• 🔧 FIXED - ISOL valves being commanded open with no bleed air supply
• 🔧 FIXED - APU bleed air prioritization
• 🔧 FIXED - Various pneumatic valve control logic
• 🔧 FIXED - Irrational OPT ALT behavior
• 🔧 FIXED - HOPPIES not working when both SayIntentions key and HOPPIES code are set
• 🔧 FIXED - Provisions for wing registration number decals
• 🔧 FIXED - Missing door decals on left side of fuselage
• 🔧 FIXED - Low resolution MCDUs
• ✏️ CHANGED - Cabin lights now dim when any engine is on
• ✏️ CHANGED - Reworked cabin pressurization system
• ✏️ CHANGED - [P3D] Saved flights now properly restore state
• ✏️ CHANGED - Slightly increased wing flex
• ✏️ CHANGED - Guards now close after the guarded button is pressed
• ✏️ CHANGED - MANPADS option now hidden/disabled on PAX models
• ✏️ CHANGED - [MSFS/FS24] Glass material on landing gear handle
• ✏️ CHANGED - Removed ADC3
• ✏️ CHANGED - Reduced granularity of MCDU brightness control
• ✏️ CHANGED - Cold and dark panel state opens 1L/2L door (F/PAX)
• ✏️ CHANGED - Ready to Start and Ready to Fly states turn cockpit lights on at night
• ✏️ CHANGED - Increased granularity of DU brightness and cockpit lighting controls
• ✏️ CHANGED - Requests to open doors not installed on the current model are now ignored
• ✏️ CHANGED - Installer now automatically adjusts layout.json
• ✏️ CHANGED - DU/MCDU brightness are now set according to time of day in default states
• ✏️ CHANGED - [MSFS/FS24] Increased low end rumble for reversers on GE
• ✏️ CHANGED - [MSFS/FS24] Adjusted volume on the ground rattle/bumps
• ✏️ CHANGED - [MSFS/FS24] Volume and minor mix adjustments to PW interior engine
• ✏️ CHANGED - [MSFS/FS24] Small volume bump to combustion start bass
• ✏️ CHANGED - [MSFS/FS24] Added small fade time to packs
• ✏️ CHANGED - [MSFS/FS24] Adjusted flaps turbulence volume
• ✏️ CHANGED - [MSFS/FS24] Tweaks and adjustments to the overall GE engine mix
• ✏️ CHANGED - [MSFS/FS24] Replaced packs sample with a better quality version
• ✏️ CHANGED - [MSFS/FS24] Adjust APU attenuation and volume (interior)
• ✏️ CHANGED - [MSFS/FS24] Adjust FD attenuation for avionics sounds, ADI/STBY clacker fixed
• ✏️ CHANGED - [MSFS/FS24] Adjusted flap growl tone to be less audible in forward sections of the plane
• ✏️ CHANGED - [MSFS/FS24] Added condition to allow windows to change the volume/filter of the ASU/GPU if the windows are opened.
• ✏️ CHANGED - [MSFS/FS24] Added fade time to cockpit and cooling fans and adjusted their loop/end points.
• ✏️ CHANGED - [MSFS/FS24] Small reduction to overall noise in the FD (packs, fans, etc)
• ✏️ CHANGED - [MSFS/FS24] Adjusted interior mix for PW engines and fixed rear wing rumble
• ✏️ CHANGED - [MSFS/FS24] Gear thumps and rattles now separated from nose vs mains and added better fadeout transition
• ✏️ CHANGED - Improved random number generator
• ✏️ CHANGED - Simulator can now partially control panel states
• ✏️ CHANGED - N2 exceeding 65% now ends FADEC initialization delay immediately
• ✏️ CHANGED - PFD now annunciates radio altitude minimum as DH
• ✏️ CHANGED - Moved inhibit tire failure alert setting to CAWS page
• ✏️ CHANGED - PROF now attempts to compute the desired glidepath angle to the runway
• ✏️ CHANGED - Revamped lower cargo area
• ✏️ CHANGED - Replaced exterior model with redone, enhanced version
• ✏️ CHANGED - Improved individual wheel/brake simulation
• ✏️ CHANGED - Overhauled prediction system
• ✏️ CHANGED - Revised PW throttle to EPR relationship
• ✏️ CHANGED - Improved LSAS yoke force simulation
• ✏️ CHANGED - APU N1 now responds to system load
• ✏️ CHANGED - Improved per-wheel brake heat/failure simulation
• ✏️ CHANGED - Improved per-engine entropy model
• ✏️ CHANGED - Refined brake temperature modeling
• ✏️ CHANGED - Improved GE sounds
• ✏️ CHANGED - Improved PW sounds
• ✏️ CHANGED - SD now redraws slightly less often
• ✏️ CHANGED - Engine variant (GE, PW4460, PW4462) is now determined by aircraft.cfg title
• ✏️ CHANGED - [MSFS/FS24] Updated loading tips
• ✏️ CHANGED - Increased resolution in various parts of the cockpit

The add-on is available in their store for $74.99 (either the passenger or freighter variant, with the option to purchase the other for an additional $9.99). The extended simulation package can be obtained for an additional $4.99.

If you enjoy our content and want to support Threshold, consider joining us on Patreon!

‍